- Humidity Range: 20-80%
- Temperature Range: 0-50 °C
- Operating Voltage: 3.5 - 5.5V
- One-Wire Serial
- 1 hz Sample Rate
-
-
- 16 Buttons
- Matrix Wiring
- 30mA Max Current
- Pad Size: 3.0" x 2.7" x 0.03"
-
USB Voltage / Current Meter Voltage Range: 3.0 - 7.5 V Current Range: 0.00 - 2.50 A LED Display -
- Test Lead with Alligator Clips
- 10 Pieces
- Length: 19 In (48 cm)
- Fresh from Florida
-
- Basic Electrical Components
- Light Emitting Diodes (LEDs)
- Resistors
- Buttons with Caps
- Potentiometers
-
- Voltmeter
- 3 Digit, Blue, 7-Segment Display
- 0V - 100V
- 0.56" Character Height
-
- 16x2 LCD Screen
- White Text on Blue Background
- Arduino Liquid Crystal Compatible
- Runs on 5V
-
- 16x2 LCD Screen
- Black Text on Green Background
- Arduino Liquid Crystal Compatible
- Runs on 5V
-
- Uses a BISS0001 signal processor
- Voltage: 5V – 20V
- Digital Output (0V/3.3V)
- <50uA Quiescent Current
- Adjustable Delay Time (0.3 sec – 10 minutes)
- Pulse Output (0.2 Sec)
- 120 Degree Viewing Angle
- 7 meter range
-
- Breadboard Jumper Wires
- 65 Pieces
- Flexible with Rigid Tips
- Various Lengths and Colors
-
- 420 Tie-Point Bread Board Layout
- 2 Trēo™ Connectors
- Pull-up Resistors Pre-installed
- RoHS Compliant
- Add custom circuitry to the Trēo™ system
-
- Creates Two I2C Connections From One
- Creates Two GPIO Plugs with GPIO0 From One with GPIO0 & GPIO1
-
- Voltmeter + Ammeter
- 2x 3 Digit 7-Segment Displays
- 0V - 100V, 1A
- 0.28" Character Height
-
- AC/DC Wall Adapter
- Input: 100-240V 50-60hz AC
- Output: 9V DC 1.5A
- Connector: DC Barrel Jack, Center +
- Cable Length: 5 ft (1.5 m)
-
- mircoSD Card
- Connects to SPI Bus
- Utilizes Native SPI SD Libraries
- E.g. Arduino SD Library
