- Connects Trēo™ Devices
- Length: 10cm
NightShade Electronics is a family-owned company that specializes in the design and manufacturing of electronic products. Our multi-disciplined team has experience in electrical, mechanical, chemical, and systems engineering. We strive for excellence in all of our designs, whether a large-scale production product or a one-off piece of test equipment. With in-house manufacturing and local partners, we provide our clients with the quality product that they need when they need it.
-
- 3-Axis Accelerometer
- FSR of ±2g, ±4g, ±8g, or ±16g
- 3-Axis Gyroscope
- FSR of ±250dps, ±500 dps, ±1000dps, or ±2000dps
- 3-Axis Compass
- FSR of ±4900µT
- On-Chip 16-bit ADCs and Programmable Filters
- Digital-output temperature sensor
- 3-Axis Accelerometer
-
- Texas Instruments OPT3002
- Wide Optical Spectrum: 300 nm to 1000 nm
- Automatic Full-Scale Setting Feature Simplifies Software and Configuration
- Measurement Levels: 1.2 nW/cm2 to 10 mW/cm2
- 23-Bit Effective Dynamic Range with Automatic Gain Ranging
- 12 Binary-Weighted, Full-Scale Range Settings: <0.2% (typ) Matching Between Ranges
-
- AC/DC Wall Adapter
- Input: 100-240V 50-60hz AC
- Output: 9V DC 1.5A
- Connector: DC Barrel Jack, Center +
- Cable Length: 5 ft (1.5 m)
-
- 0 - 4.096V Range
- 12-Bit Resolution
- 4 Single-Ended Channels or 2 Fully Differential Channels
- Internal Voltage Reference
- 5MHz Bandwidth (-3dB)
-
- ±4/±8/±12/±16 gauss selectable magnetic full scales
- 16-bit data output
- Continuous and single-conversion modes
- Interrupt generator
- Self-test
- Power-down & low-power modes
-
- mircoSD Card
- Connects to SPI Bus
- Utilizes Native SPI SD Libraries
- E.g. Arduino SD Library
-
- 420 Tie-Point Bread Board Layout
- 2 Trēo™ Connectors
- Pull-up Resistors Pre-installed
- RoHS Compliant
- Add custom circuitry to the Trēo™ system
-
- 0 - 40V Range
- 12-Bit Resolution
- 4 Single-Ended Channels or 2 Fully Differential Channels
- Internal Voltage Reference
- 5MHz Bandwidth (-3dB)
-
- Dupont Wire (Peel-Apart)
- 40 Wire
- Female-to-Male
- 20 cm (7.9 in)
-
- Texas Instruments HDC1080
- Relative Humidity Accuracy ±2% (Typ)
- Temperature Accuracy ±0.2°C (Typ)
- Excellent Stability at High Humidity
- 14-bit Measurement Resolution
- 100nA Sleep Current
- Average Supply Current:
- 710nA @ 1sps, 11-bit RH Measurement
- 3μA @ 1sps, 11-bit RH and Temperature Measurement
-
USB Voltage / Current Meter Voltage Range: 3.0 - 7.5 V Current Range: 0.00 - 2.50 A LED Display
-
- Arduino Uno R3 Compatible
- Built-In 1800mAh Lithium-Ion Battery!
- Runs 24+ Hrs on Single Charge!*
- Charges from USB in ~6 Hrs
- 5.0V and 3.3V Outputs
-
- Dupont Wire (Peel-Apart)
- 40 Wire
- Female-to-Female
- 40 cm (15.7 in)
-
- AVIA HX711
- 2 Input Channels
- Low Noise PGA
- Selectable Gain of 32, 64, and 128
- 80 Samples Per Second
-
- Through Hole Resistor
- 1/4W Power Rating
- Carbon Film Type
- 330 Ohm
-
- Basic Electrical Components
- Light Emitting Diodes (LEDs)
- Resistors
- Buttons with Caps
- Potentiometers
-
- Allegro ACS711
- 11mA Precision
- High-Sensitivity Sensing Up to 15.5A
- 100kHz Bandwidth (Response <550ns)
- 6mΩ Resistance Results in Low Losses
-
- Allegro ACS70331
- 5mA Precision
- High-Sensitivity Sensing Up to 5A (AC or DC)
- 1MHz Bandwidth (Response <550ns)
- 1mΩ Resistance Results in Low Losses
-
- Dupont Wire (Peel-Apart)
- 40 Wire
- Female-to-Male
- 40 cm (15.7 in)
-
- Breadboard Jumper Wires
- 65 Pieces
- Flexible with Rigid Tips
- Various Lengths and Colors
-
- Test Lead with Alligator Clips
- 10 Pieces
- Length: 19 In (48 cm)
- Fresh from Florida
-
- 90° Rotation
- 12 kg-cm (166 oz-in) Torque Operating Voltage: 5-6V
- 4 Horns and Mounting Brackets Included
-
- 180° Rotation
- 9 g-cm (0.125 oz-in) Torque
- Operating Voltage: 5V
- 3 Horns Included