Skip to content
-
- Texas instruments TCA9534A
- 5-V Tolerant I/O Ports
- Three Hardware Address Pins Allow up to Eight Devices on the I2C bus
- Pin-Change HW Interrupt
-
- Mallory AST501Q
- 4kHz Frequency
- 87dB Sound Pressure @ 10cm
-
- Dupont Wire (Peel-Apart)
- 40 Wire
- Male-to-Male
- 20 cm (7.9 in)
-
- Connects Trēo™ Devices
- Length: 50cm
-
- Holtek HT16k33
- 8 Digit Numerical Display (Red)
- 16-Step Dimming
-
- Through Hole Resistor
- 1/4W Power Rating
- Carbon Film Type
- 1k Ohm
-
- Arduino Uno Compatible
- Connects To Breadboard
- Injects 5V or 3.3V Into Power Rails
- 1800mAh LiPo Battery
- Secondary Wiring Header
- Breadboard Included
-
- Dupont Wire (Peel-Apart)
- 40 Wire
- Male-to-Male
- 40 cm (15.7 in)
-
- Through Hole Resistor
- 1/4W Power Rating
- Carbon Film Type
- 150 Ohm
-
- Distance Measuring Range: 20 to 150 cm
- Analog Output
- Supply Voltage: 4.5 to 5.5 V
- Operating Current: Typ. 33 mA
- Dimensions: 29.5×13×21.6 mm
-
- 16x2 LCD Screen
- Black Text on Green Background
- Arduino Liquid Crystal Compatible
- Runs on 5V
-
- Creates Two I2C Connections From One
- Creates Two GPIO Plugs with GPIO0 From One with GPIO0 & GPIO1
-
- Through Hole Resistor
- 1/4W Power Rating
- Carbon Film Type
- 10k Ohm
-
- Arduino Uno Compatible
- Built-in microSD Socket
- Low-Power Consumption
- Perfect for Datalogging
- Pairs well with energyShield 2 Pro
-
- Microswitch
- Momentary Action
- 6 x 6 x 5 mm
- 4 Pack
-
- 400 Tie Point Breadboard
- 0.1" Pitch
- 6.7 x 2.4″ (170 x 60 mm)
-
- USB A-to-B Cable
- 1.5 ft (0.5 m)
-
- Voltmeter + Ammeter
- 2x 3 Digit 7-Segment Displays
- 0V - 100V, 1A
- 0.28" Character Height