Skip to content
-
- AVR Programmer
- 6-pin & 10-pin ICSP Connector
- Operating Voltage: 5V
-
- Ceramic Capacitors
- 30 Values (10 Each)
- 300 Pieces
-
- Displays the Status of Each Data and Power Connection
- Signals Pass Through Visualizer with No Losses
- Great for Troubleshooting
-
- Distance Measuring Range: 20 to 150 cm
- Analog Output
- Supply Voltage: 4.5 to 5.5 V
- Operating Current: Typ. 33 mA
- Dimensions: 29.5×13×21.6 mm
-
- 90° Rotation
- 12 kg-cm (166 oz-in) Torque Operating Voltage: 5-6V
- 4 Horns and Mounting Brackets Included
-
- AVIA HX711
- 2 Input Channels
- Low Noise PGA
- Selectable Gain of 32, 64, and 128
- 80 Samples Per Second
-
- Texas Instruments OPT3002
- Wide Optical Spectrum: 300 nm to 1000 nm
- Automatic Full-Scale Setting Feature Simplifies Software and Configuration
- Measurement Levels: 1.2 nW/cm2 to 10 mW/cm2
- 23-Bit Effective Dynamic Range with Automatic Gain Ranging
- 12 Binary-Weighted, Full-Scale Range Settings: <0.2% (typ) Matching Between Ranges
-
- On Semiconductor CAT25512
- 128-byte Page Write Buffer
- Additional Identification Page with Permanent Write Protection
- Self-timed Write Cycle
- Hardware and Software Protection
- Block Write Protection
- Protect ¼, ½, or Full EEPROM Array
- Low Power CMOS Technology
- 4,000,000 Program/Erase Cycles
- 200 Year Data Retention
-
- TCA9534A GPIO Expander
- 16 Key Input Pad
- I2C Interface
- Interrupt Generation
-
- Texas instruments TCA9534A
- 5-V Tolerant I/O Ports
- Three Hardware Address Pins Allow up to Eight Devices on the I2C bus
- Pin-Change HW Interrupt
-
- Panasonic JS1-5V-F Relay
- 10A Current Rating
- C Form: NO & NC
-
- 0 - 4.096V Range
- 12-Bit Resolution
- 4 Single-Ended Channels or 2 Fully Differential Channels
- Internal Voltage Reference
- 5MHz Bandwidth (-3dB)
-
- ±4/±8/±12/±16 gauss selectable magnetic full scales
- 16-bit data output
- Continuous and single-conversion modes
- Interrupt generator
- Self-test
- Power-down & low-power modes
-
- Texas Instruments HDC1080
- Relative Humidity Accuracy ±2% (Typ)
- Temperature Accuracy ±0.2°C (Typ)
- Excellent Stability at High Humidity
- 14-bit Measurement Resolution
- 100nA Sleep Current
- Average Supply Current:
- 710nA @ 1sps, 11-bit RH Measurement
- 3μA @ 1sps, 11-bit RH and Temperature Measurement
-
- Allegro ACS711
- 11mA Precision
- High-Sensitivity Sensing Up to 15.5A
- 100kHz Bandwidth (Response <550ns)
- 6mΩ Resistance Results in Low Losses
-
- Allegro ACS70331
- 5mA Precision
- High-Sensitivity Sensing Up to 5A (AC or DC)
- 1MHz Bandwidth (Response <550ns)
- 1mΩ Resistance Results in Low Losses
-
- 0 - 40V Range
- 12-Bit Resolution
- 4 Single-Ended Channels or 2 Fully Differential Channels
- Internal Voltage Reference
- 5MHz Bandwidth (-3dB)
-
- 2 Panasonic JS1-5V-F Relays
- 10A Current Rating
- C Form: NO & NC
-
- Holtek HT16k33
- 8 Digit Numerical Display (Red)
- 16-Step Dimming
-
- 3-Axis X,Y,Z
- 10-bit Resolution
- ±16g Range
- Single/Double Tap Detection
- Free-Fall Detection
- 10,000g Shock Survival
-
- 3-Axis Accelerometer
- FSR of ±2g, ±4g, ±8g, or ±16g
- 3-Axis Gyroscope
- FSR of ±250dps, ±500 dps, ±1000dps, or ±2000dps
- 3-Axis Compass
- On-Chip 16-bit ADCs and Programmable Filters
- Digital-output temperature sensor
-
- Arduino Uno Compatible
- Built-in microSD Socket
- Low-Power Consumption
- Perfect for Datalogging
- Pairs well with energyShield 2 Pro
-
- Microchip MCP96L00
- Supports K Type Thermocouples
- 0.0625°C Resolution
- Internal Cold-Junction Temperature Compensation
- Programable Rising or Falling Temperature Alerts for Hot and Cold Junctions
- Low Power Consumption
-
- Arduino Uno R3 Compatible
- Built-In 1800mAh Lithium-Ion Battery!
- Runs 24+ Hrs on Single Charge!*
- Charges from USB in ~6 Hrs
- 5.0V and 3.3V Outputs
-
- Arduino Uno Compatible
- Connects To Breadboard
- Injects 5V or 3.3V Into Power Rails
- 1800mAh LiPo Battery
- Secondary Wiring Header
- Breadboard Included
-
- Raspberry Pi HAT Adapter
- 5 Trēo Modules: 4 Character 7-Segment Display, Temperature & Humidity Sensor, Light Sensor, Dual LED Indicator, Dual Button
- 5 Trēo Cables
- Fully Supported with Datasheets, Software, CAD
