• The Raspberry Pi 4 4GB offers a 1.5GHz 64-bit quad-core Cortex-A72 (ARM v8) processor, dual-band wireless LAN, Bluetooth 5.0/BLE, Gigabit Ethernet, and Power-over-Ethernet support (with separate PoE HAT)
  • The Arduino for your projects with wireless connectivity and motion sensing.
    • Texas instruments TCA9534A
    • 5-V Tolerant I/O Ports
    • Three Hardware Address Pins Allow up to Eight Devices on the I2C bus
    • Pin-Change HW Interrupt
  • The Raspberry Pi 3 B+ offers a 1.4GHz 64-bit quad-core processor, dual-band wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and Power-over-Ethernet support (with separate PoE HAT)
  • The Raspberry Pi 4 2GB offers a 1.5GHz 64-bit quad-core Cortex-A72 (ARM v8) processor, dual-band wireless LAN, Bluetooth 5.0/BLE, Gigabit Ethernet, and Power-over-Ethernet support (with separate PoE HAT)
    • 2 Indicator LEDs
    • 2 Label Spaces
    • Connects Trēo™ Devices
    • Length: 100cm
    • Adapts Trēo to Raspberry Pi Boards
    • 8 Trēo™ Connectors
      • 4 I2C
      • 3 SPI
      • 3 GPIO
      • 1 UART
      • 1 SDIO
    • RoHS Compliant
    • Allegro ACS70331
    • 5mA Precision
    • High-Sensitivity Sensing Up to 5A (AC or DC)
    • 1MHz Bandwidth (Response <550ns)
    • 1mΩ Resistance Results in Low Losses
    • Allegro ACS711
    • 11mA Precision
    • High-Sensitivity Sensing Up to 15.5A
    • 100kHz Bandwidth (Response <550ns)
    • 6mΩ Resistance Results in Low Losses
    • Microchip MCP96L00
    • Supports K Type Thermocouples
    • 0.0625°C Resolution
    • Internal Cold-Junction Temperature Compensation
    • Programable Rising or Falling Temperature Alerts for Hot and Cold Junctions
    • Low Power Consumption
    • AVIA HX711
    • 2 Input Channels
    • Low Noise PGA
    • Selectable Gain of 32, 64, and 128
    • 80 Samples Per Second
    • On Semiconductor CAT25512
    • 128-byte Page Write Buffer
    • Additional Identification Page with Permanent Write Protection
    • Self-timed Write Cycle
    • Hardware and Software Protection
    • Block Write Protection
      • Protect ¼, ½, or Full EEPROM Array
    • Low Power CMOS Technology
    • 4,000,000 Program/Erase Cycles
    • 200 Year Data Retention
    • Holtek HT16k33
    • 4 Digit Numerical Display (Red)
    • 16-Step Dimming
    • Connects Trēo™ Devices
    • Length: 30cm
    • Arduino Uno R3 Compatible
    • Built-In 1800mAh Lithium-Ion Battery!
    • Runs 24+ Hrs on Single Charge!*
    • Charges from USB in ~6 Hrs
    • 5.0V and 3.3V Outputs
    • Texas Instruments HDC1080
    • Relative Humidity Accuracy ±2% (Typ)
    • Temperature Accuracy ±0.2°C (Typ)
    • Excellent Stability at High Humidity
    • 14-bit Measurement Resolution
    • 100nA Sleep Current
    • Average Supply Current:
      • 710nA @ 1sps, 11-bit RH Measurement
      • 3μA @ 1sps, 11-bit RH and Temperature Measurement
  • The Arduino UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with. The UNO is the most used and documented board of the whole Arduino family.